(e.g. yourname@email.com)

Forgot Password?

    Digital Visual Information Distribution System Logo

    Travis beta tests lasers [Image 8 of 12]

    Issued by: on
    VIRIN:
    Date Created:
    City:
    State:
    Country:
    A person in military camouflage uniform is working with a handheld tool connected to a flexible metal conduit hose in a space illuminated by intense yellow-green lighting. The environment appears to be an enclosed workspace lined with reflective metallic/foil material on the walls and curtains. The worker is bent over a work surface, operating what appears to be a pneumatic or laser tool.

    TRAVIS AIR FORCE BASE, CALIFORNIA, UNITED STATES

    03.07.2018

    Photo by Staff Sgt. Amber Carter 

    60th Air Mobility Wing

    Airman 1st Class Levi Gordon, 60th Maintenance Squadron aircraft structural maintenance, uses a Clean Laser 1000 to remove paint from a sheet of metal March 7, 2018, at Travis Air Force Base, Calif. The 1000-watt laser can remove paint and corrosion. It reduces the waste created from sanding paint by 90 percent Travis was chosen as one of two bases to test the capabilities of the laser. (U.S. Air Force photos by Staff Sgt. Amber Carter)

    IMAGE INFO

    Date Taken: 03.07.2018
    Date Posted: 03.12.2018 19:45
    Photo ID: 4208870
    VIRIN: 180307-F-OT558-0053
    Resolution: 6016x4016
    Size: 13.71 MB
    Location: TRAVIS AIR FORCE BASE, CALIFORNIA, US
    Web Views: 49
    Downloads: 8

    PUBLIC DOMAIN  

    This work, Travis beta tests lasers [Image 12 of 12], by TSgt Amber Carter, identified by DVIDS, must comply with the restrictions shown on https://www.dvidshub.net/about/copyright.

    GALLERY

    A close-up image of a welding or cutting tool in operation, producing visible sparks and light at the point of contact with a metal surface. A gloved hand (blue glove) is holding the tool, which appears to be a plasma cutter or similar industrial cutting device. The image is taken at a low angle, emphasizing the sparks and the metallic work surface.
    A U.S. Air Force airman in ABU (Airman Battle Uniform) camouflage is operating what appears to be a laser cleaning or welding tool on a metal surface. The airman is wearing protective eyewear and blue gloves while working on a large metallic equipment unit. A bright light emission is visible at the tool's contact point with the metal surface.
    A close-up image of a handheld welding or laser tool being applied to a metal surface, producing visible sparks or a bright arc at the point of contact. The operator is wearing a blue protective glove, indicating adherence to safety practices. The background shows a blurred industrial or workshop environment.
    A person wearing blue protective gloves is operating a handheld welding or laser tool on a metal surface, producing visible sparks at the point of contact. The tool appears to be a professional-grade handheld device with a gray housing, metal collar, and small aperture at the tip. The work is being performed inside what appears to be an industrial enclosure or confined metal workspace.
    A person wearing US Air Force digital camouflage (ABU) uniform and blue protective gloves is using a handheld laser device, branded 'CleanLASER', on a metal panel or sheet. The work appears to be taking place inside an aircraft or military vehicle, evidenced by the aluminum-lined interior walls and structural components visible in the background. The laser is actively emitting light, suggesting a cleaning, marking, or surface treatment operation is in progress.
    A U.S. Army soldier in camouflage uniform is operating a power drill or similar handheld power tool in a dimly lit environment. The image has a strong green tint, suggesting it may have been captured under low-light or night-vision-like conditions. The soldier appears to be performing maintenance or construction work on a metal surface or rail.
    A person in military camouflage uniform is working with industrial equipment in a facility bathed in green-tinted lighting. The individual appears to be operating a handheld tool connected to a hose or vacuum system near a large metal enclosure or cabinet. The environment suggests a maintenance, fabrication, or technical work area, possibly on a military installation.
    A person in military camouflage uniform is working with a handheld tool connected to a flexible metal conduit hose in a space illuminated by intense yellow-green lighting. The environment appears to be an enclosed workspace lined with reflective metallic/foil material on the walls and curtains. The worker is bent over a work surface, operating what appears to be a pneumatic or laser tool.
    A military personnel in camouflage uniform is handling a piece of equipment in a dimly lit environment illuminated by green light. The individual appears to be working with a cone-shaped or nose-cone device that has warning labels and indicator lights visible on its surface. The scene suggests a maintenance or loading operation conducted under low-light or night conditions.
    A military service member in camouflage uniform is working with industrial equipment in what appears to be a maintenance or fabrication facility. The scene is bathed in a distinctive green-yellow light, likely from sodium vapor or specialized lighting. The worker is operating a handheld tool connected to a flexible hose, working on a metal component surrounded by reflective foil material.
    A worker in full protective gear is manually sanding or finishing a large curved surface, likely a wind turbine blade or similar composite structure. The entire image is cast in a strong yellow-green tint, suggesting specialized lighting conditions, possibly UV or safety lighting in an industrial facility. The worker is wearing a white Tyvek-style coverall, safety glasses, a hood, and gloves while working in what appears to be a controlled manufacturing or finishing environment.
    A worker in full protective gear is working on a large curved composite or fiberglass component inside what appears to be a spray booth or controlled manufacturing environment. The entire image has a strong yellow-green tint, likely from UV or specialized lighting used in the facility. The component being worked on has a distinctive curved, wing-like or blade-like shape, suggesting aerospace, wind energy, or industrial manufacturing.

    MORE LIKE THIS

    ASSOCIATED NEWS

    Travis beta tests lasers

    CONTROLLED VOCABULARY KEYWORDS

    No keywords found.

    TAGS

    60 MXS
    Clean Laser 1000
    Travis Air Force Base

    OPTIONS

  •   Register/Login to Download
  •   Validate Your Account to Download
  •   Connect My Placements
  •   Download Photo
  •   Download Gallery
  •   Add to My Albums
  •   Create TinyURL
  •   Connect to Placements
  •   Add to Playlist
  •   Distribute Photo
  •   Schedule Social Post
  •   Edit Photo
  •   Add Gallery to Playlist
  •   Distribute Gallery