
[Sponsors] 
August 28, 2010, 16:56 
Porous Media modeling

#1 
New Member
Rupak
Join Date: Aug 2010
Location: Rochester, NY
Posts: 6
Rep Power: 13 
How do i define a region to be porous?
I was working with the tutorial part 8, 'modelling flow through a porous media'. The only thing i did not understand is whether the region has to be defined as being porous while it is modelled in Gambit, or do i just create a meshed volume and define it as porous when i import it to Fluent. I can only proceed once i know how to create the porous media. thanks for the help 

August 31, 2010, 18:15 

#2  
New Member
symon
Join Date: Jul 2009
Posts: 1
Rep Power: 0 
I built the region as fluid in gambit and then define it as porous in the boundary conditions!
Quote:


August 31, 2010, 18:34 

#3 
New Member
Rupak
Join Date: Aug 2010
Location: Rochester, NY
Posts: 6
Rep Power: 13 
when you say you defined it as porous boundary condition, do you mean using the porous jump as the boundary conditio?


September 4, 2010, 05:39 

#4  
New Member
Join Date: Jul 2010
Posts: 22
Rep Power: 13 
Quote:
hi If you want to model flow in a porous medium in fluent, you should specify the zone as fluid zone in gambit, and then in "cell zone conditions" dialog box, enable porous zone check box , and specify related parameters such as porosity. good luck 

November 18, 2010, 03:16 

#5 
New Member
Oky Andytya
Join Date: Nov 2010
Posts: 26
Rep Power: 13 
As i know the parameter in porous zone is inertial and viscous resistance.
How to define it? Is there any formula or something? Would you like give an example. Thank you. Danke. 

November 18, 2010, 16:30 

#6 
New Member
Rok Sibanc
Join Date: Sep 2009
Posts: 9
Rep Power: 14 

November 22, 2010, 23:49 

#7  
New Member
Oky Andytya
Join Date: Nov 2010
Posts: 26
Rep Power: 13 
Quote:
I did't use porousjump, may be any formulation or something ? 

November 23, 2010, 07:11 

#8 
New Member
Rok Sibanc
Join Date: Sep 2009
Posts: 9
Rep Power: 14 
Yes but for the porous zone (cells) has two parameters (viscous resistance and inertial resistance) that you have to specify. And you determine these two from the pressure drop vs velocity profile using the equations at the link.


December 2, 2010, 07:17 

#9  
New Member
Nelly
Join Date: Oct 2010
Posts: 5
Rep Power: 13 
Quote:
If not, here is the explanation. The formula is Dp/L= [(viscosity/alpha)*velocity]+ [C2*1/2*density*velocity^2] (dp/l =viscousr resistance + inertial resistance) and plot dp/l vs velocity in excel. The pressure drop can be obtained from cfd. The values for velocity can be arbitrarily chosen say for ex. 0 to 20 m/s (even more if you want more points) Plot Dp/L vs velocity based on above formula and examine the curve how it looks like. If it is a straight line then use only dp/l=viscous resistance. If it is a quadratic equation use (dp/l =viscousr resistance + inertial resistance). Find K and C2 with these curves. Hope this helps . cheers Nelly 

December 20, 2010, 04:01 

#10 
New Member
Oky Andytya
Join Date: Nov 2010
Posts: 26
Rep Power: 13 
How to calculate the diameter particle [Dp] if i use Ergun or BlakeKozeny equation to define inertial resisitance and porosity? [see ANSYS Fluent 6.3 User's Guide  7.19.6]
BlakeKozeny Equation: P/L={150*mu*(1e)^2}/{Dp^2*e^3}*V$ where: P/L : Pressura drop mu : viscosity e : void fraction Dp : Perticle diameter V$ : Velocity unlimited Thank you ! Regrads OKY 

December 20, 2010, 05:25 

#11  
New Member
Nelly
Join Date: Oct 2010
Posts: 5
Rep Power: 13 
Quote:
The Ergun equation assumes that the bed is filled with uniform sized and shaped particles. The sphericity parameter is used as a conversion factor for nonspherical particles (comparing the surfacevolume ratio of those particles to an equivalent spherical particle). Of course, for fully spherical particle, the sphericity = 1. Sphericity = (6/Dp)/(Sp/Vp) Dp = Diameter of the particle Sp = Surface area of the particle Vp = Volume of the particle For 'not so crazy' shapes, like sand particles, you can use sphericity around 0.8  0.9. Complete list of sphericity values can be found in "Perry's Chemical Engineers Handbook", or "Unit Operations of Chemical Engineering by McCage, Smith and Harriot" or similar books 

December 21, 2010, 21:56 

#12 
New Member
Oky Andytya
Join Date: Nov 2010
Posts: 26
Rep Power: 13 
How to calculate the heat transfer in porous media [for conduction and convection heat transfer]?
Thank you, Regrads OKY 

February 1, 2011, 21:53 

#13 
New Member
Oky Andytya
Join Date: Nov 2010
Posts: 26
Rep Power: 13 
Hi everyone,
I'm trying simulation porous media in rectangular channel, but the result isn't suitable with any research. So, would you help me. I wish someone can check my simulation and give some reports if there is something wrong. Thank you for your help. Please send your email, than i will send you my works to to your email. my email: oky.andytya.net@gmail.com Regrads, OKY Andytya P note: I use ANSYS Fluent 6.3 [CFD] 

May 20, 2011, 04:42 

#14 
New Member
M. A.
Join Date: Jul 2010
Posts: 27
Rep Power: 13 
Hi friends,
I'm simulating a tube with water flow. The tube encounters boiling near the wall. I intend to calculate 'void fraction versus enthalpy' along the channel. Can you help me how to calculate void fraction? I'm in an emergency condition. Waiting for your comments!!! Thanks Everybody 

May 25, 2011, 00:04 

#15 
New Member
Oky Andytya
Join Date: Nov 2010
Posts: 26
Rep Power: 13 
Hi,
I want ask, how to get the value of convection coefficien [h] from Fluent directly ? Thank you, regrads OKY 

March 18, 2012, 15:11 
Porous Jump

#16 
New Member
Akim Faisal
Join Date: Jan 2012
Posts: 18
Rep Power: 11 
Hi,
I am having problems with specifying the boundary condition of a bottom wall of a 3D rectangular channel as a "porous jump" . In GAMBIT I select Boundary type as "Porous Jump" however, when I import my mesh in FLUENT I receive an error stating that: "Cannot change porous to porousjump because there is only one adjacent cell thread". I am not sure what that means, can anyone please help me with this case. Any suggestion is appreciated. Thanks, Akim 

September 8, 2012, 16:53 

#17 
Senior Member
zaynah K.
Join Date: Jun 2012
Location: Mauritius
Posts: 138
Rep Power: 11 
hi
had you been able to simulate your flow through porous?? if so please contact me.. zaynah 

March 6, 2013, 10:01 

#18  
New Member
Join Date: Mar 2013
Posts: 8
Rep Power: 10 
Quote:
I am modelling a tube through which mixture of air and water passes and there is an air permeable membrane around the internal wall of the tube which is permeable to air only. I should model this as VOF in Fluent. First, I need to set this wall boundary as Porous Jump in Gambit. I did the following steps in Gambit and when importing the mesh into Fluent, I got the same Error Message as you got: "Cannot change porous to porousjump because there is only one adjacent cell thread". 1) created a cylinder as volume 2) meshed it 3) set the boundaries as inflow, outflow, and porous jump (for the volume) 4) set the fluid zone 5) export the mesh to Fluent I was wondering if you could get rid of this Error Messsage and how? Or if any body else can help me model this case, it is much appriciated! Thanks, Leram 

May 15, 2013, 11:36 

#19 
New Member
hadi
Join Date: Apr 2013
Posts: 16
Rep Power: 10 

August 21, 2013, 17:17 
Porous media modeling

#20 
New Member
i man
Join Date: Feb 2013
Posts: 10
Rep Power: 10 
What is the most suitable software to simulat a porous media(some thing like flow past a fabric) and pressure drops?
CFX or Fluent? 

Tags 
gambit, porous 
Thread Tools  Search this Thread 
Display Modes  


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
modeling the fluid flow in porous media by Fluent  Mohsen Nazari  FLUENT  5  April 26, 2019 05:45 
Modeling heat transfer through a porous media  harimighty  FLUENT  3  July 23, 2016 06:11 
Discrete phase modeling on porous media  magnounibo  FLUENT  0  April 9, 2009 09:18 
Modeling thin perforated plates as porous media  Mike  FLUENT  0  August 21, 2007 05:16 
porous media: Fluent or StarCD?  Igor  Main CFD Forum  0  December 5, 2002 16:16 